Best Materials for Attic Insulation Top Up

Request an Estimate

Call 1-905-424-7469 or fill out our form.

This field is for validation purposes and should be left unchanged.

When it comes to topping up your attic insulation, you have different types of insulation and materials to achieve your targeted R-value and make your home more energy-efficient. Insulating your attic can save you money and is not an expensive home improvement to make.

Living in Toronto and the GTA means there will be cold weather in winter and warm weather in summer. With prices for natural gas, oil, and electricity on the rise, the only effective way to cut your heating and cooling energy bills is by topping up your attic insulation.

Sure, you could always turn down your thermostat in winter and up in summer. Yet do you really want to wear heavy winter clothing indoors and hardly any clothing in summer? Topping up your attic insulation is a project that can typically be completed in a day and cut between 10 to 50% off your heating and cooling energy bills.

Choosing the Right Type of Attic Insulation

Is your attic open and unfinished? Is your attic partially finished with flooring? These questions are important as it can determine which type of attic insulation is best for topping up. For unfinished attics, some of your topping up insulation options are:

Loose Fill – Loose fill works great if you have existing insulation you do not need to replace. You have the new insulation spray foam on top of the existing insulation. It is perfect to fill in air gaps and spaces to create the desired depth and density to reach the ideal R-value.

Batts/Rolls – If you must have insulation replaced or your attic simply lacks insulation, batts – rolled insulation – can be a good foundation to start with. However, if you have irregular spacing, obstructions, or low clearances, then loose fill might be a better choice.

Sizing Up Your Current Attic Insulation

You can check your existing attic insulation yourself. However, why worry about climbing into the attic when you can get a free estimate from Logik Roofing. Plus, we will inspect your current insulation to make sure it is not compressed, moldy, or water-stained. If it is, it will need to be replaced since it is no longer insulating your home.

If you are ready to top up your attic insulation and enjoy lower heating and cooling energy bills, contact Logik Roofing at 1-905-424-7469 to schedule an appointment to find out how much attic insulation your home needs. We serve Whitby, Ajax, Pickering, MississaugaRichmond Hill and surrounding areas.

You may even qualify for a home efficiency rebate through a qualifying program. We even offer easy financing! Remember to inquire about both of these when you call to book your appointment.

What People Say

Joe S.

“Thank you Logik Roofing! Top-notch company. I called them because I had a bad leak with my roof. They sent someone out the same day to fix the issue. I will definitely be using them when it’s time to do my entire roof. Thanks again, guys.”

Raja S.

“Amazing team right from the get-go. Very prompt, very professional, and very efficient. It was a very good experience as a first-time customer getting my roof done. Thanks to the entire team for such a good experience.”

Jerry C.

“We are so pleased by Mark and Peter from Logic Roofing and Insulation. They were very professional in their approach to us and their work. They took care of our home and clean up after the job as if it was their own home. Very friendly and professional. I have recommended them to my neighbors, friends, and relatives.”

Request an Estimate

Call 1-905-424-7469 or fill out our form.

This field is for validation purposes and should be left unchanged.