As of January 5, 2026, you can get up to $1,250 back for making your home more comfortable. Qualify INSTANTLY with no assessment cost & get your rebate fast.
One company for the cause, the cleanup, and the re‑insulation.
Scarborough attic mold shows up at the worst times. A home inspector flags it during a sale. An insulation crew points it out when they pull back the old batts. Or you spot dark staining on the sheathing yourself while grabbing the holiday decorations.
The standard fix means you call a remediation company, then an insulation installer, then maybe a roofer. Each has a separate timeline, separate warranty, and separate paperwork. Logik handles the visible mold. We assess the attic conditions that caused it. Then we can do the re‑insulation and any needed roofing work. It all happens across two clearly scheduled visits. You get one plan, not three phone calls and three invoices.
Scarborough’s neighbourhoods mix post‑war bungalows, late‑century subdivisions, and recent infill. A 1950s bungalow may have only basic original ventilation, leaving limited airflow. A 1990s home can have complex rooflines that trap dead air pockets. A newer infill wraps tight building envelopes around only a few unsealed ceiling gaps. Each era creates its own attic moisture trap, and visible mold is often the first sign something is off.
Warm, damp indoor air rises into a cold attic every winter. It condenses on the underside of the roof sheathing. Scarborough’s humid summers keep that moisture in place longer than you might expect, so the sheathing stays damp through spring as well. This weather pattern turns a small leak into a steady source of condensation. Mold follows. When you act before the next heating season, you shut the door on another winter of condensation.
Pot lights, an uninsulated attic hatch, and bathroom fans that vent into the attic instead of outdoors are common leakage points in Scarborough homes. A dozen small openings add up to enough moist air to sustain visible mold growth. These flaws are often original to the house and were never sealed when the home was built. During the attic condition assessment, we check every one of them so you know exactly what to correct.
We remove contaminated insulation where it is present. We treat the affected roof sheathing with a professional‑grade method that addresses the staining and reduces discolouration, restoring the attic’s appearance. We contain the work area and use professional‑grade air filtration throughout.
During the same visit, we check ventilation, air‑sealing gaps, fan exhausts, and any signs of a roof leak. In older bungalows, we often find that ventilation is inadequate; in newer homes, a few unsealed ceiling gaps can drive moisture. You get a plain‑language report with corrective recommendations, not a sales pitch.
If you choose to proceed, the recommended work is quoted separately and scheduled later. This can include air sealing, insulation replacement, ventilation baffles, attic hatch upgrades, and bathroom or kitchen fan duct corrections that vent outdoors. Each recommendation is tied to a specific attic finding so you know why it matters.
Because Logik can handle the re‑insulation and any roofing work, you are not left chasing a separate contractor after the mold is addressed. One company closes the attic gap from start to finish. You have one point of contact, one schedule, and one relationship.
A quick call or a virtual photo review helps us understand what you are seeing before anyone arrives. We will give you a clear idea of what to expect and when we can come.
The team sets up proper containment of the work area, addresses the visible mold, and assesses the attic conditions that let moisture build up. You walk away with corrective recommendations at the end of the visit. If the job is small, we may remove impacted insulation the same day.
We quote the recommended work separately and schedule it for a later day. Air sealing, insulation replacement, and ventilation upgrades happen here. You get a firm schedule and a clear scope before any work begins.
We inspect the attic to confirm the visible mold has been treated. We provide any supporting documentation you may need for your insurer or your own records. The paperwork includes photos and a remediation log. This helps if you are in the middle of a real‑estate transaction.
You get remediation, insulation, and roofing under one umbrella. That means you are not managing three different appointments, three warranties, and three invoices. When you hire separate mold remediation and insulation companies, you become the project manager. We eliminate that middle role.
You receive a clear explanation of what is contributing to moisture in your attic, with recommendations you can choose to act on later. No pressure, no mystery.
Logik is a registered Ontario contractor with proper liability insurance and WSIB coverage, so we handle the work professionally from the first visit.
We know the area’s bungalows, split‑levels, and newer builds. We have seen the same attic pitfalls repeat across the neighbourhoods, and we know what to look for.
Many Scarborough sellers call us after a home inspection flags attic mold. We work quickly and provide the photos and remediation log you need to share with insurers, buyers, or agents.
The mold remediation cost depends on your attic size, the extent of visible mold, and how much insulation needs to be removed and replaced. After the first visit, you get a detailed, no‑obligation estimate so you know the numbers before making any decision. When you hire a mold remediation contractor who also handles insulation and roofing, you avoid paying for a third‑party handoff later.
Every policy is different. Your provider may request documentation showing that visible mold was professionally addressed. Logik can supply supporting records, including photos and a remediation log. Coverage is determined by your provider, and we never promise a claim will be paid.
We typically complete the remediation visit in a day. Corrective work is scheduled later, and the timeline depends on what is recommended. We give you a clear schedule before anyone starts.
No. We focus on the visible mold you can already see and the attic conditions that allowed it to grow. A detailed attic assessment is part of the first visit.
We address the visible mold and identify the moisture conditions that caused it. This reduces the chance it returns. Because attic moisture can sometimes come from sources beyond our control, we cannot claim mold will never reappear.
Scrubbing the surface without removing wet insulation or fixing the moisture source often leads to the same problem coming back. A qualified mold remediation contractor brings proper containment and professional treatment. They also do a structured attic assessment. This gives you a far better chance of a lasting improvement.
Many Scarborough sellers call us after a home inspection flags attic mold. We work quickly and can provide documentation you may need for the sale. We will coordinate with your real‑estate timeline so the transaction can move forward.
We cover the entire Greater Toronto Area. Contact us for a free quote on your spray foam insulation project.
Don’t see your location? Contact us.
We care about doing the job right the first time and making sure your home is treated with respect and attention.
Call 1-905-424-7469 or fill out our form.
