As of January 5, 2026, you can get up to $1,250 back for making your home more comfortable. Qualify INSTANTLY with no assessment cost & get your rebate fast.
One company that remediates the visible mold and explains the moisture, wherever you live.
In Durham Region, from the waterfront towns of Ajax and Pickering to the quiet roads of Scugog, homeowners keep finding dark staining on their attic sheathing. That staining is often visible mold. You might find it during a home inspection. Or on a cold winter morning when frost glints on the roof nails.
Many people try to wipe the spots away or call a company that only cleans the surface. But attic mold tells you moisture has been building up there. If nobody understands the moisture, the staining usually returns. You need a contractor who will address the visible mold right away. Then they should explain what is driving the moisture. That lets you decide on the right improvements.
Homes near the lake often experience higher year‑round humidity, which can contribute to attic moisture. In summer, warm moist air pushes into attics. It condenses against the cooler roof deck. In winter, the damp air near the lake mixes with indoor humidity. The same attic surfaces become a condensation point. The wood stays wet, and mold gets the moisture it needs.
Durham winters swing between deep cold snaps and sudden thaws. Warm air from your living space rises. It slips through every unsealed gap: pot lights, attic hatches, plumbing chases. When that warm air hits the freezing roof deck, condensation forms. Then frost. Then water as it melts. This cycle soaks sheathing and insulation. It is one of the biggest drivers of attic mold across the region.
Many Durham attics were built before modern ventilation standards. Regardless of the home’s age or location, soffit vents can get blocked by insulation. Bathroom fans may still vent into the attic. The air has no clear exit. These conditions trap moisture against the wood. That gives mold exactly what it needs to spread.
First, we walk your attic to map the visible mold. We find the moisture pathways feeding it. We check for air leaks, blocked soffits, and bathroom fans venting into the attic. We also look for signs of past roof leaks. This assessment gives you the corrective recommendations. You will use them to decide on improvements.
Our crew sets up containment. They use professional‑grade air filtration and commercial treatments. These address the visible mold on your sheathing and rafters. We remove contaminated insulation where needed. The goal is to bring the attic environment back to a stable state. We reduce the staining. We stop the active growth you can see.
After the treatment, you get a straightforward list of recommended corrective work. It might include air sealing the attic floor, upgrading bathroom‑fan vents, adding soffit baffles, or replacing old insulation. We do not bundle or pressure you. You decide what corrective work to do. We quote and schedule it for a later visit.
Logik is a full‑service attic contractor. So we can also handle re‑insulation, ventilation repairs, and roof‑vent work on that second visit. You do not have to find a separate insulation company or roofer. After the mold is gone, the same familiar team comes back to do the improvements.
Call or fill out the form on this page. We will ask a few questions about what you noticed in your attic. If you have photos, we use them to triage the situation. Then we schedule a first visit at a time that works for you.
Our crew arrives, sets up containment to protect your home, and gets to work. During this visit we assess the attic conditions. We perform the professional remediation of visible mold. We remove any insulation that is too contaminated or damaged to keep. We apply the treatment that reduces staining. Before we leave, you get written corrective recommendations. You also get a separate quote for any improvements you might want on a later visit.
If you choose to move ahead with the recommended improvements, we schedule a separate visit. These could be air sealing, ventilation upgrades, or re‑insulation. We quote and perform this work independently. You have full control over what gets done. We keep corrective work separate from the remediation visit. You get full control.
After the work is complete, you get the paperwork you need for your records. If you are dealing with an insurance claim, we can provide supporting documentation. We will also tell you what to look for going forward. That helps you keep your attic in good shape.
Logik is a mold remediation contractor that does not just remove mold. We are a full‑service attic contractor. We remediate the visible mold. We assess the moisture cause. If you choose, we also handle the insulation, ventilation, and roofing work. That is something mold‑only companies cannot do. You avoid coordinating multiple trades.
You do not have to wonder if we cover your town. Our crews work in Oshawa, Whitby, Ajax, Pickering, Bowmanville, and Port Perry. We go right out to Uxbridge and the Scugog lakeshore. The same process, the same trained specialists, and the same careful containment protocols apply. Wherever your home sits.
We have experience working in homes across Durham Region, from century properties to newer builds. That practical, hands‑on knowledge means our moisture assessments reflect real local conditions, not generic checklists.
Our mold remediation is done entirely by Logik’s own trained crew. We never hand it off to a third party. When you choose corrective work later, the same company returns. That continuity keeps communication simple. Accountability stays in one place.
We operate as a fully licensed and insured Ontario contractor with WSIB coverage. Our remediation work follows industry‑recognized containment, removal, and post‑remediation verification procedures. So every job meets a professional standard every time.
Cost depends on your attic size, the extent of visible mold, and whether insulation needs to be removed. On your first visit, we assess the conditions. We give you a clear quote for the remediation. Any corrective work is quoted separately. This gives you full control over the total scope and price.
We can provide the supporting documentation your insurer requests. That includes photos and remediation logs. We cannot promise your claim will be covered. Your insurer makes coverage decisions based on your policy and the cause of the loss.
No contractor can promise mold will never reappear. We address the visible mold. We reduce staining. We give you a practical list of attic improvements that lower moisture and make it far less likely to return. Our work does not end with wiping the surface.
We complete the initial assessment and visible‑mold remediation in a single visit. The time needed depends on your attic size and the extent of the mold. If we need to remove insulation, that may add to the total job. We factor that into the schedule we give you before we start.
We understand the urgency when a real‑estate transaction is on the line. Our team can often schedule your first visit quickly. We also provide the documentation your lawyer needs to keep the sale moving.
No. Because we use proper containment and professional air filtration, the work stays confined to the attic. You can carry on at home while our crew works above.
We cover the entire Greater Toronto Area. Contact us for a free quote on your spray foam insulation project.
Don’t see your location? Contact us.
We care about doing the job right the first time and making sure your home is treated with respect and attention.
Call 1-905-424-7469 or fill out our form.
