As of January 5, 2026, you can get up to $1,250 back for making your home more comfortable. Qualify INSTANTLY with no assessment cost & get your rebate fast.
You had it cleaned. It came back. Logik remediates the visible mold in your attic and assesses the conditions that let it grow, so you know what actually needs to change.
Dark staining on your roof sheathing is a moisture problem you can finally see. Warm, humid air rises through your home (the stack effect), finds gaps in the attic floor, and condenses against the cold underside of your roof deck in winter. The visible mold is what shows up on the sheathing. The moisture conditions behind it are what allowed it to grow. If those conditions were not addressed the first time, the mold came back for a reason.
Attic mold remediation is not a single-trade job. The same attic that has visible mold often has air leakage paths that need sealing, ventilation that is blocked, and insulation that has absorbed moisture. Logik handles attic mold remediation, insulation, and roofing as one company. When the assessment finds corrective work, Logik can quote and schedule it on a later visit. You are not left coordinating a remediation company, an insulation contractor, and a roofer on three separate timelines.
The rest of this page covers what the service includes, what causes attic mold to develop and return, and what the visit sequence looks like. If you are not sure where your situation fits, the signs and causes sections below are a good place to start.
If you have had attic mold cleaned before and it came back, the service structure below explains why that happens and what a different approach looks like. Attic mold rarely shows up as one problem with one fix. The service is built to address what you can see right away, then give you a clear picture of the conditions behind it.
This is the core service, and it happens on the first visit. If you see dark staining or black spotting on the underside of your roof sheathing, a musty smell in the attic, or mold flagged during a home inspection, this is where the work starts.
Logik addresses the visible mold using professional remediation methods and a commercial-grade mold treatment. The work removes and reduces staining on the sheathing, helps restore the appearance of the affected area, and improves the overall attic environment. This is professional mold remediation, not a surface wipe-down.
The visible mold remediation is always done first. Corrective recommendations follow from what was found on site. Any corrective work is quoted and scheduled separately on a later visit.
Every mold remediation job includes an on-site attic assessment. This is what separates a cleaned attic from an attic that has a better chance of staying clean.
The assessment covers the conditions that contribute to moisture: air leakage paths (unsealed attic hatches, pot lights, plumbing penetrations), ventilation (soffit intake and roof exhaust), fan venting (bathroom, kitchen, and dryer fans), the vapour barrier, and the condition of the insulation. Logik identifies what was found and provides practical corrective recommendations specific to your attic, not a standard checklist applied to every job.
The assessment happens on Visit 1, alongside the remediation. Corrective work, if you choose to proceed, is quoted and scheduled separately for a later visit. There is no separate estimate-only visit.
When insulation has been contaminated by mold, damaged by moisture, or has become compressed and is no longer performing properly, it needs to come out. This is determined on site during the assessment and is not always required.
On smaller jobs, removal of impacted insulation may happen on the first visit if conditions warrant. Re-insulation (the blow-in and final fill) is typically part of the corrective work on a later visit. Re-insulation work may qualify for energy rebates on the insulation portion.
Many standalone remediation companies remove the mold-affected material and leave. The homeowner then has to find an insulation contractor separately. Logik handles both as one company, across separately-quoted visits. The attic insulation page covers material options and rebate eligibility in detail.
When the assessment finds contributing conditions, the corrective work addresses them directly. This is Visit 2 work, quoted and scheduled separately after the Visit 1 assessment.
Corrective work can include air sealing (caulking around light fixtures, pot lights, fans, and gaps in the attic floor), ventilation baffles to keep soffit-to-roof airflow open, attic hatch upgrades (weatherstripping and insulating the back of the hatch), and fan venting corrections (an insulated hose connected to a proper roof vent, vented to the exterior). Where roof vents are needed, Logik handles that too.
A homeowner who needs ventilation corrections, fan venting fixed, and re-insulation would otherwise be coordinating three separate contractors. Logik quotes and schedules all of it as one company, across separate visits. You decide which improvements to proceed with.
The visible mold is addressed on the first visit. Logik does not defer the remediation while a corrective-work quote is assembled. You get the visible mold addressed right away. Corrective recommendations follow from what was found on site. The remediation is the urgent work; the corrective improvements are the longer-term decisions.
Attic mold rarely has a single cause. The on-site assessment covers air leakage paths, ventilation, fan venting, the vapour barrier, and insulation condition together. A moisture problem in one area usually involves a defect in another. The corrective recommendations come from what was actually found in your attic.
Logik handles attic mold remediation, insulation, and roofing. When the assessment finds corrective work, Logik can quote and schedule it on a later visit as one company. You decide what corrective work to proceed with. If you want one company to handle all of it, that option is there.
Catching attic mold early matters. The longer moisture sits against your roof sheathing, the more the structure is affected. These are the signs that point to attic mold, including the early ones that often show up before visible mold is obvious.
Frost on the underside of the roof or on nail heads in winter. This is often the first sign that warm, moist air from the living space is condensing against the cold roof deck. If the frost is larger or more widespread than it was the year before, the moisture conditions are getting worse, not better.
Dark staining, black, white, or green spotting, or discolouration on the underside of the roof sheathing. This may be visible mold growth. It often appears in patches and spreads along the sheathing boards.
A damp, musty smell in the attic. A basement-like odour in the attic is a common early sign of moisture build-up, even before visible mold is obvious.
Damp or wet insulation. Insulation that feels wet or has visible staining may be holding moisture against the structure and contributing to ongoing mold conditions.
Wet, damp, or dripping roof sheathing, or visible condensation on the underside of the roof deck. Active condensation on the roof deck is a sign that warm air is reaching the cold surface regularly.
Mold flagged during a home inspection. This is a common discovery for homeowners selling or buying a home, and often the first time the attic has been inspected in years.
Attic mold is usually a sign that moisture has been building up, and there is rarely a single cause. If you had mold cleaned and it came back, this is worth understanding. If the moisture conditions were not addressed the first time, the conditions that allowed mold to grow were still present. That is why the on-site assessment looks at the full attic rather than assuming one source. Here are the most common contributing factors, starting with the one seen most often in the field.
Warm, moist air rises through the home (the stack effect) and escapes into the attic through gaps in the attic floor. Unsealed attic hatches, pot lights, plumbing stacks, electrical penetrations, and open wall cavities all let warm air through. When that warm air meets the cold underside of the roof deck in winter, it condenses. Sealing these air-leakage paths is central to the corrective work.
Indoor humidity that climbs above the 30 to 40 percent range in winter means more moisture is moving into the attic. Common sources include furnace humidifiers set too high, frequent showers, cooking, laundry, and the moisture load from people and pets. That excess moisture finds its way into the attic through the same air leakage paths.
Blocked or insufficient soffit intake vents, or inadequate roof exhaust ventilation, mean that moisture entering the attic has nowhere to go. A properly ventilated attic moves air from the soffits to the ridge, carrying moisture out with it. When that airflow is blocked or insufficient, moisture builds up against the sheathing.
Bathroom, kitchen, and dryer fans that vent into the attic instead of to the exterior are a direct moisture source. A fan that terminates inside the attic pumps warm, humid air directly against the cold roof deck every time it runs.
Roof leaks, flashing failures, and ice damming can introduce water directly into the attic. Ice damming, common in Ontario winters, can force water back under the shingles and into the attic.
The company assessing your attic is the same company doing the remediation. The people who assess your attic, perform the remediation, and quote any corrective work are all from one company. You are not managing handoffs between a remediation contractor and a separate insulation or roofing company.
One company across the full attic scope. Many standalone remediation companies remove the visible mold and leave. The homeowner then has to find an insulation contractor to replace the removed material, and possibly a roofer or ventilation contractor to address the underlying conditions. Logik handles attic mold remediation, insulation, and roofing. When the assessment finds corrective work, Logik can quote and schedule it on a later visit. You are not left coordinating multiple contractors across the full attic scope.
Remediation and assessment on the first visit. The visible mold is addressed on Visit 1, not deferred while a corrective-work quote is assembled. The attic assessment also happens on that visit. You leave with both a remediated attic and a clear picture of what conditions contributed to the moisture. There is no separate estimate-only visit.
Practical corrective recommendations, not a sales pitch. The corrective recommendations come from what was found on site in your attic. Logik identifies the contributing conditions (air leakage paths, ventilation gaps, fan venting issues) and explains what each one means for your specific attic. You decide which improvements to proceed with. The corrective work is quoted and scheduled separately, on a later visit.
Supporting documentation when requested. When documentation is needed for an insurance-related matter, Logik can provide supporting documentation. This is documentation support, not an insurance claim service, and no coverage outcome is implied.
Contact Logik and describe the situation: dark staining, frost on nail heads, a musty smell, or a mold flag from a home inspector. Logik conducts a brief virtual triage (photos, symptoms, history) before scheduling the on-site visit. There is no separate estimate-only visit. The assessment and remediation happen together on the first visit.
On the first visit, Logik assesses the attic on site and performs the visible mold remediation using professional remediation methods and a commercial-grade treatment. The assessment covers air leakage paths, ventilation, fan venting, the vapour barrier, and insulation condition. At the end of the visit, you receive corrective recommendations based on what was found in your attic. On smaller jobs, removal of impacted insulation may also be completed on this visit if conditions warrant.
The corrective recommendations from Visit 1 are reviewed with you. Any recommended corrective work (air sealing, ventilation baffles, fan venting corrections, attic hatch upgrades, insulation removal and replacement, roof vents) is quoted separately. You decide which improvements to proceed with. There is no obligation to proceed with any corrective work.
The recommended corrective work, if you choose to proceed, is carried out on a later visit. This can include air sealing, ventilation baffles, attic hatch upgrades, fan venting corrections (insulated hose connected to a proper roof vent), insulation removal and replacement, and roof vents where needed. Re-insulation work may qualify for energy rebates on the insulation portion. The attic insulation page covers what that process looks like and which rebate programs may apply.
Traditional mold companies remove visible contamination and stop there. We address both the mold and the moisture source that caused it. Our team handles removal, moisture source repair, and restoration as one integrated project. You get a complete solution instead of just surface cleaning.
Yes, we provide the detailed documentation that insurance companies require. Photo evidence, removal logs, moisture source identification, and verification testing results. Our experience with insurance requirements helps streamline the claims process and improves approval rates.
Because we address the underlying moisture source, recurrence is far less likely. Our workmanship warranty covers the removal work and moisture source repairs we perform, subject to specific terms and conditions. If issues arise, you have one company to call instead of trying to coordinate multiple contractors.
Timeline varies based on the extent of contamination and required repairs. We provide a detailed timeline during the assessment phase based on your specific situation.
Yes, this is one of our key advantages. We remove contaminated insulation during removal and install new insulation during restoration. This eliminates the coordination challenges and potential warranty gaps that occur when multiple contractors are involved.
We provide mold removal services throughout the Greater Toronto Area and Durham Region. This includes Ajax, Bowmanville, Brampton, Courtice, Markham, Mississauga, Newcastle, Newmarket, North York, Oakville, Oshawa, Pickering, Port Perry, Richmond Hill, Scarborough, Stouffville, Thornhill, Toronto, and Whitby.
We cover the entire Greater Toronto Area. Contact us for a free quote on your spray foam insulation project.
Don’t see your location? Contact us.
We care about doing the job right the first time and making sure your home is treated with respect and attention.
